Customization: | Available |
---|---|
Type: | Professional Amplifier |
Usage: | Stage |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
FP7000 | FP9000 | FP14000 | FP6000Q | FP10000Q | FP20000Q | FP22000Q | |
8 ohm Stereo Power (RMS) | 1500WX2 | 1800WX2 | 2400WX2 | 700WX4 | 1350WX4 | 2200WX4 | 2500WX4 |
4 ohm Stereo Power (RMS) | 2800WX2 | 3000WX2 | 4400WX2 | 1300WX4 | 2100WX4 | 4000WX4 | 4650WX4 |
8 ohm Bridged Power (RMS) | 5600W | 6000W | 8800W | 2500WX2 | 4200WX2 | 8000WX2 | 9300WX2 |
4 ohm Bridged Power (RMS) | 7000W | 9000W | 14000W | 3000WX2 | 5000WX2 | 9000WX2 | 15000WX2 |
Frequency Response(+o/-0.3dB,1W/8Ω): | 20 Hz - 34 kHz | ||||||
THD 20 Hz - 20 kHz for 1W: | <0.1% | ||||||
Signal-to-Noise Ratio: | >112 dBA | ||||||
Channel separation (Crosstalk) at 1 kHz : | >70 dB | ||||||
Input Connectors (per channel): | 3 pin XLR, electronically balanced | ||||||
Output Connectors (per channel): | Binding Posts 2-pole | ||||||
Class: | TD | ||||||
TourClass Protection: | ACL, IGM, AutoRamp, short circuit, DC voltage, turn on/off transient, current inrush, sub/ultrasonic input | ||||||
Operating voltage, 220V / 110V nominal: | 180-240 V / 90-130 V selectable | ||||||
Voltage Gain(dB): | 23, 26, 29, 32, 35, 38, 41, 44 dB selectable | ||||||
Input impedance: | 20 kOhm | ||||||
Level adjustment (per ch.): | Front panel potentiometer, 31 positions detented from -inf to 0 dB |
Feature |
4 Channel Class TD Switching power amplifier. 4 x 4,000 Watts into 4 Ohms,4 x 2,200 Watts into 8 Ohms Neutrik XLR*/speakon connectors. Upgrade high-quality capacitor 3300uf 200V to 3600uf 200V. Use Original ONSEMI transistor. Creat SUPER sound quality,good for dual 18 inch subwoofer. High quality fans from TaiWan. Extended heatsink board to 94 mm. Separately controllable on Gain. Scalable Voltage Peak Limiter (VPL). Bridge-mode operation for Touring Applications. Comprehensive protection scheme. |