| Type: | Professional Amplifier |
|---|---|
| Usage: | Hi-Fi, AV, KTV System, Stage |
| Used For: | Professional |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | Technical Parameters | DSP20000Q | ||||||
| 8 ohm Stereo Power (RMS) | 2200WX4 | ||||||
| 4 ohm Stereo Power (RMS) | 4000WX4 | ||||||
| 8 ohm Bridged Power (RMS) | 8000WX2 | ||||||
| 4 ohm Bridged Power (RMS) | 9000WX2 | ||||||
| Frequency Response(+o/-0.3dB,1W/8Ω): | 20 Hz - 34 kHz | ||||||
| THD 20 Hz - 20 kHz for 1W: | <0.1% | ||||||
| Signal-to-Noise Ratio: | >112 dBA | ||||||
| Channel separation (Crosstalk) at 1 kHz : | >70 dB | ||||||
| Input Connectors (per channel): | 3 pin XLR, electronically balanced | ||||||
| Output Connectors (per channel): | Binding Posts 2-pole | ||||||
| Class: | TD | ||||||
| TourClass Protection: | ACL, IGM, AutoRamp, short circuit, DC voltage, turn on/off transient, current inrush, sub/ultrasonic input | ||||||
| Operating voltage, 220V / 110V nominal: | 180-240 V / 90-130 V selectable | ||||||
| Voltage Gain(dB): | 23, 26, 29, 32, 35, 38, 41, 44 dB selectable | ||||||
| Input impedance: | 20 kOhm | ||||||
| Level adjustment (per ch.): | Front panel potentiometer, 31 positions detented from -inf to 0 dB | ||||||
| Control de software | Controles de amplificador de potencia múltiple | Pantalla táctil |
| El procesador incorporado del amplificador, pantalla led de 4 pulgadas puede tocar, controlar el efecto de sonido del amplificador | El amplificador DSP también controla por PC, a través del software puede ajustar más el procesador dsp | Una PC puede controlar de forma independiente el amplificador dsp serveral al mismo tiempo |
Feature |
||
| 4 canales clase TD amplificador de potencia de conmutación con DSP 4 x 4,000 vatios en 4 ohmios, 4 x 2,200 vatios en 8 ohmios Crea una calidad de sonido SUPER Controle el efecto de sonido al tocar en la pantalla LED frontal de 4 " O controlar el efecto de sonido por ordenador Software DSP simple, sin necesidad de instalación, fácil de operar Operación en modo puente para aplicaciones Touring Esquema de protección integral Utilice el transistor original ONSEMI Conectores Neutrik XLR * / Speakon Tabla de disipador térmico extendido hasta 94 mm. |
||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}